Battery Pack with Charger
Ideal for use with the 12 volt, 13 watt fluorescent work lights when working in remote areas. Charger plugs into 120 volts AC and charges at 1.2 amps, 12 volts DC. Charger is furnished with 6' cord and male lighter plug to insert into the female outlet of the battery; charger then plugs directly into a 120 volt outlet. If battery is discharged to recommended maximum depth, the charger requires 16 hours to fully recharge. As battery is charged, the output of the charger reduces to low level; battery must be removed from the charger within three days of charging. Fully charged battery will operate a work light for about 5 hours continuously. Rugged nylon battery case with double zipper and closed cell foam padding on the sides and bottom furnished with 2" adjustable web belt with quick release buckle and two "D" rings to connect the hooks of the shoulder strap. Shoulder strap is 60" long overall with 12" long foam pad that covers shoulder top and adjustable strap on each end. Triangular "D" ring on the front adjustable strap provides a place to hang your light to give hands-free lighting.
• 7 Amp hour capacity, sealed lead acid type battery
• Taper charger
• Safety vent opens if battery is overheated
• Battery furnished with 1' power cord having female 12 volt outlet
• Battery pack - 5.75 lbs, 6" Height, 2 1/2" Width, 3 1/2" Length
| | Cat. No. |
|
Battery pack, charger, shoulder strap, and case with belt
|
5331-0005
|
Accessories and Replacement Parts
| | Cat. No. |
|
13 watt, 12 volt, 1.25A DC lamp (shock resistant, rough service)
|
5331-0006
|
|
7A hour battery assembly
|
5331-0007
|
|
Magnetic base and removable swivel hook assembly
|
5331-0008
|
|
|
