Ground Fault Circuit Interrupters
Protects people and equipment by interrupting electrical power when loads have a potentially lethal ground current in excess of 6 milliamps. The portable construction enables use of these devices in a variety of applications, such as power tools or hand lamps. Manual reset is required after trip (fault) condition or power outage occurs to prevent unmonitored equipment start-up.
• UL Listed, CSA Approved
• 15 and 20 Amp, 120 and 240 Volt, 60 HZ models available
• 4-6 milliamp trip level
• Indoor/Outdoor usage
• Provides protection in 3 wire circuits
• Mechanical trip indicator to show power "ON"
• Rugged construction for long lasting durability
• Grounded neutral - 4 ohms typical
• Open neutral protection
• Radio frequency interference suppression to protect against nuisance tripping
| Ground Fault Circuit Interrupters | NEMA Configuration No. | Rating | Cat. No. |
|
GFCI cord set, 11" long
|
5-15P/R
|
15A, 120V AC
|
5002-0510
|
|
User attachable GFCI portable power plug
|
5-15P
|
15A, 120V AC
|
5002-0511
|
|
User attachable in-line GFCI, dual voltage
|
-- --
|
15A-20A, 120V-240V AC
|
5002-0512
|
|
GFCI cord set, 6' long with tri-tap receptacle
|
5-15P/R
|
15A, 120V AC
|
5002-0518
|
|
GFCI protected quad box (2 of the 4 receptacles are T-slotted to allow both 15 and 20 amp tools, with either NEMA 5-15 or 5-20 plugs)
|
5-20P/R
|
20A, 120V AC
|
5002-0519
|
|
In-line GFCI with plug and receptacle attached
|
5-15P/R
|
15A, 120V AC
|
5002-0520
|
|
In-line GFCI with plug and Tri-Tap receptacle attached
|
5-15P/R
|
15A, 120V AC
|
5002-0528
|
|
|
